AR MAGLOCK Gen 4 – AR-10 / .308 Fixed Magazine Lock and Release Solution.

Just a simple push on the pin with your thumb opens the action for mag changes, then automatically re-locks when you push the receivers together (with optional KingPin).

The Gen 4 benefits:

• New set screw on locking arm, allowing for adjustment to ANY receiver width including billet, composite, or 80% non mil-spec receivers.
• Allows for “free state” adjustment when traveling outside California. Just reset the set screw to the end of the post and the locking arm will work just like an OEM magazine release button.

Choose a shaft length that matches your receiver:

Narrow - Choose this one if you possess Aero Precision M5, DPMS, S&W M&P, Troy, Wilson Combat, CMMG Mk3, LMT, JD Machine, SLR Rifleworks, Ruger SR-762 .308, receivers.

Standard - Choose this one if you possess a PSA, Armalite, LWRC, Anderson, Colt, Juggernaut, SIG, Savage Arms, Vault Armory, Quentin Defense, Mega Arms.

All AR MAGLOCK locking kits are patented under USPTO patent number: 8,756,845. KingPin is patented under 10,126,078.

*Does not include rear takedown pin or KingPin

Note: ARMaglock has spent an enormous amount of time designing these California compliant systems to function as smoothly and flawlessly as possible. They believe that there products are far superior in manufacturing tolerances and function and have designed some adjust-ability into the new Gen 4 AR MAGLOCK arm to support some of the tolerance variability in the .308 platforms. That being said you may still come upon some issues with fitment. If this happens feel free to email ARMAglock and they will make every effort to help you troubleshoot installation. 

Note: Due to unanticipated surface changes and unique firearm features from each manufacturer, there may be certain incompatibilities with your firearm system. Some billet receiver sets may not work. If your rifle is NOT a DPMS modeled platform, then you may experience install issues. We state this because the locking arm will not fit right out of the packaging. The customer will have to sand down the arm where it contacts the upper receiver so it sits flush on the receiver surface. If you are comfortable modifying the arm it will work fine.

WARNING / DISCLAIMER: NEVER while the action is open have the safety “OFF”, and NEVER pull the trigger. For safety reasons, never disassemble your firearm while loaded. Please make sure and check that all rounds are removed before disassembly of the action. With any CA Compliant disassembling device, it is even more imperative that you clear any rounds prior to disassembly.

Always observe the 4 rules of firearm safety:

1. Treat the firearm as if it is ALWAYS loaded
2. Never point it at anything you don’t intend to destroy
3. Keep your finger off the trigger until you’re ready to fire
4. Know your target and it’s surroundings